in Umuahia Nigeria  sales   price   shop   near me   near me shop   factory   supplier 600W Handheld Optical Fiber Coupling Laser Welding Machine manufacturer   best   Cost   Custom   Cheap   wholesaler

we are assured to provide our customers adaptable and diversified solutions. A lot more importantly, we make particular areas in accordance to equipped drawings/samples and warmly welcome OEM inquiries. EPG has established up a comprehensive established of quality administration method which is presented with superior inspection and take a look at products.

300W/500W Location EPT EPTT for EPT Stainless Steel EPTT

:
EPTnical parameters

ProductRY300W
Laser working compoundNd3 :YAG
Laser EPTT300W
Max. single-pulse strength90J
Complete EPTT9KW
Laser wavelength1064nm
Location diameter #10920.ten-three.0mm adjustable()
Pulse width.2-20ms adjustable()
Pulse frequency1-100HZ adjustable()
EPT depth le1.2mm
Working table measurement750*1000mm
ZZ=75mm
EPTTSolitary-chip microprocessor
Observing programCCD
Focal size200mm
Cooling systemJCEP chiller
EPTT offerAC 220V plusmn10%/50HZ

Software:
Utilized for the welding of numerous metal letters, LED illuminated letters, EPT metallic signage, and exterior billboards.

EPT EPTs:
Stainless metal, carbon metal, EPTTium, auminum, galvanized sheet, EPT, silver and brass, and so forth

Functions:
1. CCD, EPT defenition CCD digicam for observing, practical for altering laser spot and location location
two. Undertake purple ligEPTT indicator, noticing rapidly laser area and welding
3.360 degree rotatable laser head, hassle-free eEPTTly for welding profiled supplies
4. U-shaped gap made for micro posioning, hassle-free for swift weld zone spot, with positioning rod, no need to have for adjustment of laser head when welding at small corners
5.Cavity can be dragged EPTTs or backwards, handy for massive and small letter welding
6. Adopt marble desk, making sure that the shining materials do not scratch.

Overall buildings and upkeep

The integral EPTT is composed of 5 parts, specifically, the manage cabinet, cooling technique, EPTT cupboard, laser and optics processing system.
The gear can also be divided into 5 components in conditions of functions, which are:
1) Laser resource
two) Laser EPTT source
3) EPTs system
4) EPTTling program
5) Cooling method.

(one) Composition
The laser is a device that converts the EPT vitality into the laser strength. This EPTT emploEPTTNdthree :YAG Laser, consisting of the subsequent parts:
a) EPTing lamp: it converts the EPT strength into the optical vitality that can activate the substances for laser processing. The EPTT adopts pulse xenon lamp with repetition price of XMC7-one hundred twenty five. The two the electrode and quartz EPT tube surface want to be cooled in the course of functioning.
b) Laser crystal: it converts the optical vitality into the laser power. This EPTT emploEPTTthe crystal #10928*145mm Nd3 : YAG as its functioning compound.
Condensing cavity: it focuses the ligEPTT from the pumping lamp on to the functioning components.
The optical resonant cavity can supply optical feedback, enabling the laser to be magnified to type higher strength laser for output. This EPTT emploEPTTthe airplane and pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel cavity manufactured up of flat mirrors with EPT as its medium. The complete reflector’s transmit is less than .four%, output reflecting mirror’s transmit is 85%.
Other parts: higher voltage electrode, insulation foundation plate, positioning bracket, adjustable diaphragm frame and laser holder.

(2) Safeguards and upkeep
As the EPTT is hugely precise equipment whose discharging attributes the high pulse voltage and charging attributes the large potential, and the laser focusing energy is extremely centralized, the operators must get skilled knowledge and skills ahead of they operate on the EPTT.
EPTal resonant cavity
The two medium diaphragms of optical resonant cavity are totally pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel to the laser bar’s conclude confront, touching or random adjustment is not allowed. Do not open up the outer hood of the laser randomly and keep the optics floor extremely thoroughly clean. Otherwise, the substantial-power laser will injury the diaphragm layer. When the laser output power is reduced down, the operator must initial examine no matter whether the medium diaphragm is thoroughly clean. If any dust, he can use lens paper or cotton wool moistened by the cleaning agent (liquid combination with ethanol complete and ethanol respectively occupying fifty%, the identical when described in the following portion) to clear it gently. Then check out the resonant cavity to see if it is misadjusted.

Cooling program
The laser has one water inlet pipe and one particular outlet pipe, respectively linked to the cooling channels of the lamp and bar. Challenging drinking water circulation at any component will trigger big loss. Each and every time when the tools is assembled, the operator need to check out the water flow at each path and make positive no fault eXiHu (West EPT) Dis.sts prior to beginning up the laser.

Xenon lamp replacement
The average support time of the pulse xenon lamp is ten8 instances of blinking if it performs unEPTTits rated EPTT and beEPTTs to the consumptive pieces. To make certain the standard overall performance of the EPTT, the lamp must be replaced when it has achieved its rated blinking instances (about ten8 moments) and the power becomes reduced.
In circumstances that the xenon lamp is ruined or its support time is shorted thanks to other brings about (for instance, it cannot pre-illuminate or no power output is offered when the voltage is improved to 500V), the xenon lamp must also be replaced.
As the energy of the sealing at the lamp’s two ends is relatively low and apt to becoming damaged, EPTT caution should be provided when substituting the lamp. The pursuing procedures ought to be followed:
Turn off the EPTT, minimize off the water offer and discharge the remaining electric power on the strength-storage capacitor
Get rid of the electrodes of lamp
Take away the gland of lamp, very carefully pull out the lamp from the aspect of the full reflector
Use cotton moistened by cleansing agent to cleanse the sleeving
Check to see if the appearance, size and other factors of the new lamp is conforming
Install the new lamp into the chamber, push the gland tigEPTT and mount the electrodes
EPT to the drinking water offer and check the sealing of every single portion to see if they are reputable
Flip on the main EPTT to verify whether the lamp can discharge usually
Attempt single spot procedure, check out whether or not the output power of laser meet up with the demands. If the output is not excellent, frequently adjust the resonant cavity
EPTT the laser with outer hood.

D.Ndthree :YAG crystal is the main portion of the laser, and is fairly costly. For that reason it should be mounted with fantastic treatment. The two conclude faces of Ndthree :YAG crystal bar is totally pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel to every other and has higher cleanliness. If there is any pollutant on the finish faces, the luminous performance will be lower, the facula method will deteriorate, or even can’t illuminate normally. In that case, the place housing this EPTT need to be cleaned and experts ought to be referred to as for associated treatment. EPTTke out the Ndthree :YAG crystal bar, use lens paper or absorbent cotton moistened by cleaning agent (liquid mixture with ethanol answer and one more respectively occupying 50 %,) to take away the grime gently. The causes top to the damage of crystal bar can be explained as follows:
a.The stream of cooling h2o is more than or interrupted, the power enter into the lamp tends to make the lamp and bar overheated, which final results in the cracking of the lamp and bar
b.The conclude experience is bumped, scratched or even damaged by tough item
c.As the diaphragm layer is polluted , the bar is damaged when the substantial energy laser passes by
d.The bar is pressed also tightly or the applied force is uneven when it is installed, the above higher inside tension breaks the bar. In this circumstance, the operator need to not open the hood of the laser, nor operate the YAG bar. If the end confront is identified polluted, experts ought to be named for the associated treatment.

E.The condensing cavity does not need to have servicing function. Usually, it is not permitted to dismantle the condensing cavity.

F. In excess of voltage security
There are 3 kinds of voltage used to the pulse xenon lamp in succession, particularly, set off voltage about 13-18 kv, pre-burning open up-circuit voltage 1500-1800 v and arc-discharge voltage about 500-2500 v. Therefore, the lamp electrode need to not get as well near to other metal objects, and a length of far more than 15mm should be retained. The insulation panel’s area should be stored dry and thoroughly clean so as to stay away from pollutions which might lower down the insulation functionality to provide brief circuit.

  in Umuahia Nigeria  sales   price   shop   near me   near me shop   factory   supplier 600W Handheld Optical Fiber Coupling Laser Welding Machine manufacturer   best   Cost   Custom   Cheap   wholesaler