Hangzhou Hengli Transmission Co., Ltd. is a transmission shaft manufacturer and universal coupling manufacturer specializing in the production of various automobiles, engineering vehicles, and mechanical equipment. The company is located in Taizhou-Jingjiang in the Yangtze River Delta, close to Zhangjiagang, Wuxi, and Changzhou, with very good water and land transportation. Convenience..
The universal coupling has a large angle compensation capability. The SWC type axis bending angle can reach 15°~25°. The SWP type has a large load-bearing capacity, safe and stable use, high transmission efficiency, and its transmission efficiency can be improved. It is used for high power. The energy saving of transmission is more obvious..
The drive shaft is a rotating body with high speed and less support, so its dynamic balance is very important.All drive shafts of our company must undergo a dynamic balance test before leaving the factory, and have been adjusted on a balancing machine..
The characteristic of the diaphragm coupling is a bit like a bellows coupling, in fact the way the coupling transmits torque is similar.The diaphragm itself is very thin, so...
11
2021/01
For the types of cardan shafts currently used, gear couplings can be used for high-power light-load transmission systems, and for transmission systems requiring heavy impact loads and shaft torsional vibrations, tire couplings can be used with higher ductility. For the equipment, the operating speed and centripetal force of the cardan shaft are higher, and the high-speed rotating shaft should be used with a balanced high..
06
2021/01
Metal heat treatment is one of the important processes in mechanical manufacturing. Compared with other processing processes, heat treatment generally does not change the shape and overall chemical composition of the workpiece, but by changing the internal microstructure of the workpiece, or changing the chemical composition of the surface of the workpiece , To give or improve the performance of the workpiece.Its characteristics:
04
2021/01
Flexible couplings without elastic elements can not only transmit motion and torque, but also have different degrees of axial, radial and angular compensation performance, including gear couplings, universal couplings, and chain couplings , Slider coupling, etc.Flexible couplings with elastic elements can transmit motion and torque, and have different ranges..
21
2020/12
The regenerative strategies of hybrid and electric vehicles may have an impact on the requirements of the drivetrain.There are two key issues.How much energy can be collected from the street, and how much energy can the transmission system really recover?The electric transmission system not only transmits power from the differential to the wheels, but also transmits negative torque..
14
2020/12
A polygon is formed by a single thin rod. The rod has a simple shape and is convenient to manufacture, but requires the pitch of each hole. Its working performance is basically the same as that of a continuous polygonal ring, but the strength and speed are lower, which is suitable for occasions where the size of the coupling is restricted. . 1. It can be assembled and disassembled in 2 hours without interfering with the master-slave device.
30
2020/11
For flexible and toothed couplings, some are lubricated with grease.That is, when the coupling is working, it can be lubricated due to the squeeze of grease.When assembling, it is coated with grease and there is sufficient lubrication inside.The grease used in high-speed devices will not separate the oil and soap under the action of centrifugal force, otherwise the coupling will leak oil..